Control valve manufacturers in Saudi Arabia
Middleeast valve is a topmost Control valve manufacturers in Saudi Arabia. We supply to major countries like Algeria, Bahrain, Egypt, Iraq and Israel. A pneumatic angle control valve is a type of control valve that is operated using compressed air or other gases as a motive force. It is designed to regulate the flow of fluid (such as gases or liquids) in a piping system, and the angle refers to the orientation of the valve body in relation to the direction of flow.
The basic operation of a pneumatic angle control valve is as follows:
1. Actuation: The pneumatic angle control valve is actuated using compressed air or other gases, which are typically supplied by an external pneumatic control system. The compressed air is directed to the valve actuator, which can be a pneumatic piston, diaphragm, or other mechanism, to open or close the valve.
2. Angle Control: The angle of the valve body in relation to the direction of fluid flow is a key feature of pneumatic angle control valves. The angle can be set at various positions, such as 90 degrees, 60 degrees, 45 degrees, or other angles, depending on the specific application and desired control characteristics. The angle of the valve body determines the flow pattern, such as throttling or diverting, and can affect the flow rate, pressure drop, and other process parameters.
3. Control Signal: The pneumatic angle control valve receives control signals from a pneumatic control system, which may include pressure regulators, controllers, transmitters, and other pneumatic components. These control signals modulate the flow of compressed air to the actuator, which in turn adjusts the position of the valve body to regulate the fluid flow.
Middleeast valve is the largest Control valve manufacturers in Saudi Arabia and can be used in various configurations, such as globe-style, butterfly-style, or other designs, depending on the specific application requirements. Proper selection, sizing, and installation of pneumatic angle control valves are important for optimal performance and efficient operation of the process system.
Advantages:
lFast and responsive control
lHigh reliability
lPrecise control
lSimple and cost effective
lEase of maintenance
Parts
lValve Body
lPneumatic Actuator
lControl Signal
lAir Supply
lPositioner
lLimit Switches
lSolenoid Valve
lStem
Industries which use these valves
lOil and gas industry
l ·Chemical industry
lPower generation
lWater treatment
lAutomotive industry
lPulp and paper industry
lMining industry
Description-
Available Materials: Ductile Iron, Cast iron, WCB,WCC, WC6, LCC, LCB, SS316, SS304, F51, F53, F55
Class: 150 to 2500
Nominal Pressure: PN10 to PN450
Size: ½” to 24”
Medium: Air, Water, Chemical, Steam, Oil
Operations: Pneumatic Actuated
Configuration of a Pneumatic Actuator:
l4-20 amp
lPneumatic single acting actuators
lPneumatic double acting actuators
lPneumatic rotary actuators
lPneumatic Scotch and Yoke actuators
lPressure: 228 bar
Temperature:
lStandard -4°F to 200°F (-20°C to 93°C)
lLow -40°F to 176°F (-40°C to 80°C)
lHigh 0°F to 300°F (-18°C to 149°C)
Visit us: https://www.middleeastvalve.com/product-category/pneumatic-angle-control-valve/